產品資料

感應式木材測濕儀

如果您對該產品感興趣的話,可以
產品名稱: 感應式木材測濕儀
產品型號: 木材水分檢測儀
產品展商: 其它品牌
產品文檔: 無相關文檔

簡單介紹

SD-C50感應式木材測濕儀/木材含水率測定儀(水分測定儀,水份測定儀,木材測水儀,水分檢測儀)運用美國哈里斯大規模集成電路技術研制而成,測量更準確、可靠,使用更方便。


感應式木材測濕儀  的詳細介紹

美國技術SD-C50感應式木材測濕儀/木材含水率測定儀
  
特    點
◆技術支持:運用美國哈里斯大規模集成電路技術。
◆測定范圍廣:SD-C50適用于生材到干燥材及各種木材制品,測量范圍為0~100。
◆輕便靈巧:SD-C50約重200克,長約160mm,小巧,便于攜帶,適合現場使用。
◆無損檢測:SD-C50廢除了扎針,只需將探頭輕輕接觸被測物表面,即能顯示木材當前含水率,且不會損壞被檢測物。
◆直觀便捷:SD-C50測定深度50mm并直接以數字顯示。
◆簡單快捷:SD-C50設置了樹種修正,能保證儀器對各種樹種的含水率準確測定。
◆一體結構:探頭與機體結為一體,排除了因連接線而造成的故障發生。
 
技術參數
◎測定方式:高頻電磁波感應式
◎測量范圍:0~100%
◎精 度:0~50%  ±0.5%;50~100%  ±1%
◎顯 示:3?LCD液晶數字顯示
◎掃描深度:50mm
◎樹種修正:10個檔位
◎電 源: 1節9v電池
◎尺 寸: 160×60×27(mm)
◎重 量: 約200g

 

FEATURES

    SD-C50 wood moisture meter produced by China SHUNDA company permits to measure the moisture content of many kinds of wood products ranging from 200 to 1000kg/m3,quickly by simply contacting and eliminate wood damage.

    The precise dielectric constant measurement with HF waves can get the moisture content of the depth of 50mm at most.

TECHNICAL DATA

   Measuring Range:0%~100%

   Resolution:0.1%

   Repetition Accuracy: ±0.5%; Display:3?LCD

   Scanning Depth:50mm(1.96 inch) at most

   Work Environment: -5 to 60

   Selectors: selector 0 to selector 10

   Power Supply:9V(6F22)

   Dimension: 160×60×27mm

   Weight:200g

APPLICATION

   Before measuring,get a right selector according to the tree species table or wood density.For example,ceiba density is about 0.4g/cm3,so when measuring ceiba wood,the right selector is 4.

   With the sensor of SD-C50 touching nothing,pressON button.Turn carefullyZERObutton till the result on the screen is between 00.0±0.5.

   With the sensor of the meter,touch the wood to be measured fully.As soon as the meter is in touch with the wood surface,the moisture content is indicated.     

NOTICE

   The wood to be measured should be wider than the sensor of the meter.

   Measure wood in the direction of the grain.

   Nothing else can be placed under the wood to be measured,otherwise the measurement will be inaccuracy.

   If the wood to be measured is not thick enough,put several pieces together until it reaches 30 mm in thickness at least.

   When turningZERO”,the figures on display are vague or always out of 00.0±0.5,it means that the battery has used up.Another battery should be replaced. 

產品留言
標題
聯系人
聯系電話
內容
驗證碼
點擊換一張
注:1.可以使用快捷鍵Alt+S或Ctrl+Enter發送信息!
2.如有必要,請您留下您的詳細聯系方式!
欧美兽皇_欧美兽交